CHEATAH PUBG DMA — SETUP & HOTKEYS
cheatah://instructions-dma status: ready
[READY] DMA build documentation... OK
Two-PC DMA setup for PUBG. The overlay runs on your second (cheat) PC and reads memory from the gaming PC over the DMA card — nothing is installed or rendered on the gaming PC.
Need help? Join our Discord or email [email protected].
First-time launch and every-session routine.
First Boot
- Power on the gaming PC first so the DMA card can enumerate over PCIe.
- Power on the cheat PC second and let Windows finish loading.
- Launch PUBG on the gaming PC and stay at the main menu while you start the overlay.
- On the cheat PC, right-click Loader.exe → Run as administrator. UAC will prompt — accept it (the loader needs SCM access to load the DMA driver).
- Sign in with the credentials you created at checkout and enter your license key when asked — keys are single-use and bind to your account.
- Wait ~10–20 seconds for the DMA handshake. The overlay menu opens automatically once it's ready — there is no console window to watch.
- The menu is visible by default. Configure your settings, then press Home to hide it and play. Press Home again any time to bring it back.
Recommended once you're set: press Insert to toggle Fusion Mode. It paints a clean dark background behind the overlay so the menu and ESP read cleanly without your desktop wallpaper bleeding through. Press Insert again to turn it off.
Every Session After That
- Boot gaming PC → launch PUBG.
- Boot cheat PC → run Loader.exe as admin.
- Wait ~10–20 seconds — the menu pops up by itself when DMA is ready.
- Press Home to hide the menu, Insert for Fusion Mode if you want the dark backdrop.
- Press End to fully exit when you're done.
Important: Always close the overlay with End (not Alt+F4 / not the X button) so the taskbar and desktop icons are restored — Fusion Mode hides them while active.
Every default hotkey wired in the build. All are remappable from Settings → Hotkeys in the menu.
Overlay & Window
| Key | Action |
|---|---|
| Home | Open / close the in-game menu. When open, the cheat PC's mouse cursor activates so you can click widgets. |
| Insert | Toggle Fusion Mode. Paints a full-screen black background behind the overlay — useful when streaming/recording the overlay alone, or for a clean radar-only view. |
| End | Terminate the overlay process and restore the desktop/taskbar. Always quit with this key. Alt+F4 leaves the shell hidden if Fusion Mode was on. |
| F9 | Clear — flushes cached entities, releases any aimbot target lock, and zeroes Kmbox/MoBox state. Use if the overlay looks frozen, ghost players linger, or aim feels stuck. |
| U | Toggle the Players List window (online scoreboard with rank/KDA). |
ESP & Visibility
| Key | Action |
|---|---|
| F10 | Toggle Focus Mode — hides items / vehicles / packages so only player ESP renders. Good for late-circle fights when loot icons clutter the screen. |
Aimbot
| Key | Action |
|---|---|
| Right Mouse | Primary aim hold — engages aimbot while held. Default target bone: Head. |
| Left Mouse | Secondary aim hold — second aim profile (e.g. body when firing). |
| Left Shift | Wheel / smoothing modifier — engages alternate aim wheel curve. |
| F2 | Switch to Aimbot Config Slot 0. Each slot keeps its own per-weapon (AR / DMR / SR / HG / LMG / SG / SMG) FOV, smoothing, and bone settings. |
| F3 | Switch to Aimbot Config Slot 1. |
Loot Groups (Item ESP)
| Key | Action |
|---|---|
| F8 | Cycle the loot ESP view through 5 group filters and hidden. Sequence: All → Group A → B → C → D → Hidden → All … |
| Numpad 0 | Jump directly to Loot Group A. |
| Numpad 1 | Jump directly to Loot Group B. |
| Numpad 2 | Jump directly to Loot Group C. |
| Numpad 3 | Jump directly to Loot Group D. |
Configure which items belong to each group from Menu → Items. Groups let you keep "essentials only" (heals + ammo) versus "everything" loadouts one keypress apart.
Remapping: Open the menu (Home), go to the relevant tab, click any key field, then press the new key. Settings persist in config.json next to the .exe.
Common questions and quick fixes.
Performance
- The overlay caps at ~360 FPS internally. If the cheat PC's GPU runs hot, that's normal — present is uncapped to stay responsive to DMA reads.
- Disable map / vehicle / item ESP categories you don't use in Menu → ESP. Every category adds per-frame draw work.
- Set ESP → Visibility Distance to your engagement range (default 1000 m) — long distances render more skeletons.
Profiles
- Three bundled profiles ship out of the box: Default, Legit, Rage. Switch from Menu → Profiles.
- Save your own: type a name in the bottom field and click Save as → it writes Profiles\<name>.json.
- Set one as auto-load and it'll restore on every launch.
Languages
8 languages supported: English, Deutsch, Français, 中文, 한국어, Русский, Türkçe, العربية, Español. Switch from the dropdown at the bottom of the menu sidebar — labels retranslate instantly.
Troubleshooting
| Symptom | Fix |
|---|---|
| Loader won't launch / closes immediately | Run as administrator. Add the loader's folder to your AV exclusions (Defender → Virus & threat protection → Exclusions → Folder). Don't move Loader.exe out of its folder. |
| "Connection Failed" / DMA never connects | Reseat the DMA card on the gaming PC. Reconnect the USB cable on the cheat PC. Reinstall the FTDI D3XX driver. Confirm the gaming PC is fully booted before you launch the loader. |
| Menu opens but ESP is empty | You're not in a match yet. ESP only renders during the Gaming scene — wait until you load into a game. Press F9 to clear stale caches if it persists. |
| Aimbot target is locked / won't release | Press F9 to clear. If using Kmbox/MoBox, confirm the device is detected on the gaming PC. |
| Held weapon icon shows "No Weapon" or wrong gun | Some weapon class names aren't mapped (mostly utility items). Held-weapon icons are best-effort. Flip the Local Weapon Icon debug toggle in Menu → ESP for diagnosis. |
| Desktop / taskbar missing after exit | You quit with Alt+F4 instead of End. Press Win+D twice, or restart Explorer (Ctrl+Shift+Esc → File → Run new task → explorer.exe). |
| CJK / Arabic / Cyrillic labels show as boxes | Falls back to your Windows system fonts (YaHei / Malgun / Tahoma) on Win10/11 — they should render. If they don't, your Windows install is missing the locale font packs; add them via Settings → Time & language → Language. |
Still stuck? Join the Discord — fastest response. Include your DMA card model, AV running, and what step failed.